2021-2023 FORD BRONCO | OE PLUS SERIES FRONT BUMPER

Offroad has designed a tubular bull bar for the Bronco’s factory modular steel bumper as an alternative for the OEM bull bar. It sits much lower in front of the grille than the OEM version, giving it a low profile appearance. The tube features 2 adjustable light mounts that allow for LED lighting to be mounted above or below the bar. Lighting options include mounting up to a 20-inch light bar above or below the tube, or an LED pod light on each of the 2 tabs. The mounting plates are constructed of 3mm steel, and the bar is made from 1.5-inch diameter x 1.5mm thick steel tubing. The bull bar is finished in a rust-resistant dual stage micro-texture black powder coat. Installation is a simple half-hour process that utilizes the 8 factory bolts already present on the Bronco’s steel bumper. Our bull bar light mount works great in tandem with our Factory Bumper Pocket Light Mounts! **Note: Does not fit the factory plastic bumper, nor the capable bumper. **Note: Elite Light Bar Rail Mounts are needed to mount a light bar. They can be added to your cart through the drop down menu. Key Features:

• Low Profile Design
• 2 Adjustable Light Mounts for 20” Light Bar or Pods
• Micro-Texture Black Powder Coat
• Bolt-On Installation

The DV8 Offroad MTO (Made to Overland) Series Bumper is a Winch-Ready Front Bumper for the 2021-2023 Ford Bronco, and is compatible with all trim levels. Manufactured from high-grade steel, the MTO Series Bronco bumper retains the factory sensors, has a 3-inch pod light mount towards each side, and mesh inserts that can be painted. There is an optional bolt-on bull bar that can mount a 13-inch LED light bar to supplement your lighting. The winch mounting point was designed to sit within the bumper, and is accessible through 2 openings at the top of the bumper. It can mount up to a 12,000 lb. winch. If you choose not to run a winch, we include light brackets to mount a single row 20-inch light bar behind the perforated aluminum accent plate. The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right. ** An Optional Steel Skid Plate is available for this bumper. Key Features:

• Optional Bull Bar
• (2) 3” Pod Light Mounts
• 2-Stage Micro-Texture Powder Coating
• 4mm Body and 5mm Mounts/Supports
• In-Bumper Winch Mount
• Reinforced D-Ring Mounts
• Compatible with Factory Plastic and Metal Skid Plates
• Works with Factory Parking Sensors
• Paintable Aluminum Mesh Panels
• 3-Piece Construction

This Bronco bull bar was designed for use with the OEM modular steel front bumper, and it mounts to the factory accessory mount locations utilizing OEM hardware. It sits much lower in front of the grille than the OEM version, giving it a low profile stance. A 13-inch single row LED light bar can be mounted within the bull bar, keeping a streamlined appearance. This offers grille protection from branches and small debris without protruding across the BRONCO logo. It is constructed from 3.5mm steel and is finished in a Micro-Texture Black Powder Coat. Key Features:

• Mounts to OEM Modular Front Bumper
• Utilizes Factory Hardware
• Fits a 13-inch Single Row LED Light Bar
• Offers Grille Protection Against Light Obstacles
• Direct Bolt-On Installation

* Please Note: This fits the Factory Heavy Duty Modular Front Bumper only.

The Bronco FS-15 Series is a 2021-2023 Ford Bronco Winch-Ready Mid-Width Front Bumper, with the option to include modular wings to make it a full-width bumper. The light mount tabs on the bull bar can be oriented to mount a 13-inch light bar above or below the bull bar. Up to a 12,000 lb. winch can be mounted on top of the bumper. At the center of the bumper, either a 20-inch dual row light bar or 6 pod lights can be mounted. Two recovery mounts that take 3/4" D-rings provide additional recovery options. This bumper is compatible with the OEM plastic & metal skid plates, and also retains the factory parking sensors. The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right. ** An Optional Steel Skid Plate is available for this bumper. Key Features

• Optional Full-Width Wings (FBBR-02W)
• Adjustable Bull Bar Light Tabs
• 2-Stage Micro-Texture Black Powder Coating
• 3.5mm Body and 5mm Mounts/Supports
• Winch Ready
• Reinforced D-Ring Mounts
• Compatible with Factory Plastic and Metal Skid Plates
• Works with Factory Parking Sensors