2007-2023 JEEP JK, JL, & JT POCKET FRONT BUMPER
This new and improved stubby Jeep front bumper was designed to fit the Wrangler JK & JL, as well as the Gladiator JT. One of its key features are the pocketed clevis mounts that fit ¾” D-rings, keeping them virtually flush with the front of the bumper except when in use. Between those mounts are fog light holes that can mount OEM 4-hole mounted fog lights, or our aftermarket LED Fog Lights. The Bull Bar includes adjustable light tabs to install lighting above or below the bar. Round lights or pods can be installed on these tabs, or you can mount our Elite 13-inch Light Bar when utilizing our Elite Light Rail Mounts.
This bumper includes an optional bolt-on winch plate, and if you’re not running a winch, it can be left off of the bumper for a streamlined look. On the bottom edge at the front face of this bumper are three M12 nut mounting points that can be used for additional lights, GoPro mounts, & other accessories. Like all of our Jeep bumpers, this has a simple bolt-on installation with no modification required.
Key Features:
- Optional Included Winch Plate
- Accommodates Factory 4-Hole Mounted Fog Lights
- Can Mount up to a 13” Light Bar Above or Below Bull Bar
- Pocketed Clevis Mounts for ¾” D-Rings
- Bolt-On Installation - No Cutting Required
- (3) M12 Nuts for Accessories Such As GoPro Mounts or Pod Lights
2018-2023 JEEP JL & 2020-2023 JT FRONT MODULAR BUMPER
DV8 Offroad’s Premium Modular Jeep Front Bumper is the best option for your Jeep JL/JT. With its structural parts made from 1/4-inch & 3/16-inch steel, it offers protection at all angles, while complementing the angles and curves of the Jeep. It includes a winch mount and D-ring mounts to provide recover options.
This bumper also features a full, front skid plate to protect your sway bar disconnect and the front of the frame. It has billet aluminum accent panels, and a central light mount that fits a 10-inch Slim LED Light Bar.
Included are stubby wings, however if you prefer full-width protection, we have you covered with our FBJL-02W full width wings.
FEATURES
- Premium Sand Black Powder Coating
- 1/4" & 3/16" Thick Plate Steel in Structural Areas
- 12,000lb Winch Compatibility
- Accepts factory or aftermarket fog lights
- Paintable Aluminum Accents
- Full Skid Plate with Fog Light Mounts
- 10-inch LED Slim Light Bar sold separately
- FBJL-02W sold separately.
2018-2023 JEEP JL & 2020-2023 JT FRONT MODULAR BUMPER WITH BULL BAR
2018-2023 JEEP JL & 2020-2023 JT FRONT STUBBY BUMPER
The DV8 Offroad FBJL-01 Wrangler JL & Gladiator Stubby Front Bumper was designed with the hardcore Jeeper in mind. It features a high-clearance design, and incorporates a protected 20-inch slim led light bar for increased visibility. The bumper is rated for up to a 12,500 lb winch and is coated with the signature DV8 textured black powder coat finish. This bumper is designed specifically for the Jeep Wrangler JL and Gladiator JT. This installs to factory mounting points.
Features:
- High clearance design
- Aggressive angles and styling
- Ready for a single row 20” LED light bar (not included)
- Winch ready
- Easy to install
- Reinforced bull bar
2018-2023 JEEP JL & 2020-2023 JT MODULAR WINGS
JEEP WRANGLER FS-1 FRONT BUMPER
JEEP WRANGLER FS-11 FRONT BUMPER
JEEP WRANGLER FS-13 FRONT BUMPER
JEEP WRANGLER FS-14 MID WIDTH FRONT BUMPER
JEEP WRANGLER FS-15 FRONT BUMPER
Our Hammer Forged Jeep front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel. The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4-inch steel while others are made of 3/16-inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
KEY FEATURES:
- Fog light holes for factory or aftermarket fogs
- 2 Bull Bar Light Mounts for 2 Pod Lights or a 12" Light Bar
- D-Rings included
- Winch Ready
- Gusseted .170 wall stinger
- Lower winch mounting point
- Lightest bumper in the Hammer Forged line
JEEP WRANGLER FS-24 FRONT BUMPER
JEEP WRANGLER FS-25 FRONT BUMPER
The FS-25 Jeep Wrangler Front Bumper combines the great looks of the popular FS-15 bumper, with an integrated boxed-in LED light bull bar. This bull bar is removable, and features a rigid dimple dye cut design to reduce weight and provide additional structural integrity.
This bumper can accommodate a 12,000 lb winch, factory or aftermarket fog lights, and a 20-inch slim LED light bar. There are 2 clevis mounts that can take 3/4-inch D-ring shackles for additional recovery options.
KEY FEATURES:
- Allows the use of factory or aftermarket fog lights
- Built in mounts for a 20" slim LED light bar in the bull bar (light bar sold separately)
- Comes with winch plate and D-Rings
- Comes with boxed bull bar
- Can accommodate up to a 12,000 lb winch
- Holes for wiring are pre-drilled for cleaner installs